What is the reason for the vibration of a working high pressure vortex blower and how to fix it?


During the operation process of high pressure blower , if the wind turbine is violent vibration, it will affect its use effect, and with the constant jitter, if the fixation is not firm is the shift running position, and at this time, if the use of hard connection, will affect the interface connectivity, or even bending and other phenomena, or the interface shock open the situation, the destructive force is very large.


Moreover, if the long time can not be effectively resolved, then the performance of the impact, and ultimately can not escape the fate of damage. So this situation, or timely feedback, timely solution is the best policy.


Want to know why the vibration, the reason is because the balance is not good, the balance is broken, the center of gravity is not the same, centrifugal force is not the same, so in order to apply this imbalance, jitter is inevitable.


1. If it is a new blower , more than 80% of this situation is the quality of the blower itself reasons, manufacturers did not detect well or there is no test directly to the customer, this situation needs to update a new, no other good method.


2. Vibration occurs when blower is working.


(1) Bearing damage, bearing role is clear, fan is using high-temperature high-speed bearings, generally not easy to problems, unless the use of a long time, the internal ball may appear wear and tear aging, because the impulsors are supported by bearings, then if it has a problem, it will be transferred to the imperfase, and then the performance of the overall fan.


(2) Impertic damage, impertic is the least likely to have problems, unless the inside of the blower into something, or scratching will also appear this problem, but the general is relatively small, need to be carefully eliminated.


(3) The use of time is too long, imperm above, the internal balance of the holes used to accumulate too much dust, destroy the internal balance, because the imperm processing can not be processed without any treatment can maintain 100% balance, so we need to rely on the dynamic balance machine increase or decrease material to maintain, which is why we will see the impulsion above there are many small holes, if there is more gray inside, because it is adjusted rotation, a little reaction will be doubled, open the fan, clean up at this time.


If all of the above is checked, or if the problem is not ruled out, then you can call our engineers online to communicate to resolve.