Steps to install a high pressure fan / blower


1, it is necessary to use flat washer and spring washer to tighten the screw;


2. It's essential to use rubber buffer adhesive to bear the weight of high pressure fan, especially high power & pressure fan / blower;


3. For some occasions that have requirements for noise, can be added to reduce the noise (under normal circumstances, approximately 5dB), the muffler is installed in the air inlet pipe or the end of the air outlet pipe;


4. For some occasions with high noise requirements, according to the conditions of the machine itself, adding a layer of silencing cotton can meet the noise requirements of site,if specific requirements could consult the high-pressure fan manufacturers or professional noise management company;


5. When using silencing cotton silencing, pay attention to the distance between the high pressure fan and the box body, pay attention to the ventilation and heat dissipation of the high pressure fan, pay attention to the use of rubber buffer adhesive to bear the weight of the high pressure fan, specific need to consult the manufacturer of the high pressure fan;


6. The inlet and outlet pipes of high pressure fans should be connected with hoses to isolate vibration.


Different use site, often use different filter precision filter element, different filter element has different maintenance methods and service life, when ordering, need to ask clearly.


In some special occasions, but also need to carry out special protection: for example, when used in a sealed environment, pay attention to ventilation and heat dissipation; When the ambient temperature (intake temperature is relatively high), we should pay more attention to ventilation and heat dissipation, or choose high pressure fans with high inlet temperature. We suggest that we have a more detailed understanding before buying.